Product weight: 105g
Product size; 60×34×49mm
Standby energy consumption: 0.2mW
Working water pressure: 0.05-0.8MPa
Working water temperature; ≤75°C
Sensing range: side sensing 0-5cm / bottom sensing 0-10cm
Packing list: Induction water saving device *1, installation wrench *1, sealing ring *3, adapter adapter *6, manual
To prevent accidental touch
Side sensor window
No debris in the distance of 10cm
Bottom sensor window
The height from the bottom of the pool should not be less than 15cm
Washing the face and washing the new fun bottom sensor to meet the short-term water demand. When the sensor enters the bottom sensing area (with a limited distance of 10cm), the water starts. When the sensor is away, the water is stopped. If the sensor stays in the bottom sensing area, the water will stop automatically after more than 20 seconds of water discharge, which is needed for daily cleaning.
Water storage mode
The side and side sensors of the pots and pans are satisfied with the water storage use requirements. When the sensor enters the side sensing area (with a limited distance of 5 cm), the water starts to flow. The water discharge time lasts for 3 minutes, and the water remains even if the sensory object leaves. If the sensor enters the side sensing area again during the water discharge process, the water can be stopped at any time, which is a good choice for water storage.